Blue Maple Arch Composite Door with Crystal Harmony Black Glass

UPVC Doors are high quality Vacuum Formed 100% uPvc Doors. Manufactured by compressing two PVCu skins either side of an Extra High Density Natural core at pressures three and half tonnes per square metre. Creating a solid door panel that is resists both heat and moisture and retains a high colour stability. All door panels are backed by a 10 year manufacturers warranty. Door panels come in a selection of styles and finishes, from white to woodgrain and half glazed to completely solid panels.

Rated People How to fit a UPVC Front Door How to measure a Double Glazed Door
Like it? Make sure you use the buttons on the left to share or send the page to your own or somebody else's address so you can come back esily.

Door Colours

Door Colours How To Measure Glass Options

TOTAL: £0.00

Need Help




NEED ANY HELP? CALL US

01482 488961 / 0844 414 6776

 

 

All production processes comply fully with the quality assurance standard BS EN ISO 9001.
Door Discount

Delivery is charged on order value at the following rates:

Delivery will be between 5 - 15 days from date of confirmation
Delivery price: £45.00

How to measure for a new PVC front door

These guidelines are to help you measure for a new PVC front and frame and make an accurate measurement.

Measure the door opening outside on both the height and width.

You have to always measure the exact brickwork opening and not the old frame or door.

Measure brick to brick in at least three different places and then deduct 10mm from both the final height and width measurements. - This is to allow for the for 5mm fitting allowance around the new frame. This will make sure the new frame will sit plumb and square once in place.

If you have any gaps then spacers and filler will be required to secure the frame into place and fill any of the gaps.


Vital: Please remember:

  • Do not measure your existing door or frame but measure the brick opening.
  • Make sure to measure in at least three different places and deduct 10mm from both the final height and width measurements - we do not make any fitting allowances on the sizes you provide.
  • All dimensions to be supplied in Metric and all designs viewed externally.

How to Measure - Width

Width
The width should be measured brick to brick at three points - top, middle and bottom of the opening. The smallest of these measurements is taken as the width. Always deduct 10mm from the final width.


How to Measure - Height

Height
The height should be measured brick to brick at three points - left, middle and right of the opening. The smallest of these measurements is taken as the height. Always deduct 10mm from the final height.